Back To Main Page
I'm beginning to fit the circuitry into the chassis. You can begin to
see what the finished product will look like.
Now here you can see it just about assembled.
Not shown is the external switches where the green wires go to.
That's the 12 volt lines for controlling the relays.
And now... drumroll please! Due to a generous donor i have...
New coil wire! AWG #28 with super thin coating made of nylon, etc.
This thing weighs several pounds! It must be miles of wire!
And finally... a 645A, 1.6kV SCR! (That's just over 1 MW)
Better view of the red/white connections
Back To Main Page
bravenet.com
